User Comments
{"We use CAEPIPE to design the process coils in our steam cracking furnaces. These coils operate at temperatures between 1,200°F & 2,000°F. Supports must be sized properly to prevent coil distortion and rapid failure. CAEPIPE graphic displays are extremely useful in determining if we have input the geometry correctly and in evaluation of results." }
Arthur DiNicolantonio, Exxon, CAEPIPE user for over 12 years
{"The new graphics rendering feature [in CAEPIPE v5.x] is fantastic. It far exceeds the graphics of any other piping stress analysis program I have seen."}
Ed Patnode, Advanced Thermal, CAEPIPE user for over 10 years
We are in the process of creating videos so you can use them to get informed or trained.
Title |
Approx. Duration |
More Info |
PDMS |
||
| PDMS to CAESAR-II Translator | 11 minutes | Short Desc. |
| PDMS to CAEPIPE Translator | 6 minutes | Short Desc. |
CATIA |
||
| CATIA to CAEPIPE Translator | 2 minutes | Short Desc. |
CheckStress |
||
| CheckStress (for PDMS) | 6 minutes | Short Desc. |
PDS |
||
| PDS to CAEPIPE Translator | 3 minutes | Short Desc. |
| PDS to CAESAR-II Translator | 4 minutes | Short Desc. |
TOP |
BACK